25V 25A switch mode electrolysis rectifier

Input parameters:Three phase AC380V±10%, 50HZ

Output parameters: DC 0~25V 0~25A

Output mode: Common DC output

Cooling method:Air cooling

Power supply type: IGBT-based High-frequency Power Supply

Application Industry: Electrolytic copper foil Auxiliary cathode


Electrolytic copper foil refers to copper material as the main raw material, using electrolytic copper foil production. Dissolve copper material by copper sulfate solution, then in electrolytic equipment, copper sulfate solution by direct current electrodeposition and made the original foil, again carries on the coarsening, curing, heat resistant, corrosion resistant layer, prevent oxidation layer surface treatment, such as lithium electricity copper foil axial-flow compressor.in order main surface oxidation treatment, finally made after cutting, testing the finished product.

During electrolysis, cations in the electrolyte migrate to the cathode and electrons are reduced at the anode. The anion runs to the anode and loses electrons to be oxidized. Two electrodes were connected in copper sulfate solution and direct current was applied. At this point, copper and hydrogen will be found to precipitate from the plate connected to the cathode of the power supply. If it is a copper anode, copper dissolution and oxygen precipitation occur simultaneously.

Electrolytic copper foil, as a key functional basic raw material of electronic manufacturing industry, is mainly used in the production of lithium ion battery and printed circuit board (PCB). Among them, lithium copper foil has good electrical conductivity, good machining performance, soft texture, mature manufacturing technology, outstanding cost advantages and other characteristics, so it becomes the choice of lithium ion battery anode collector.

Technical Parameters

Characteristic Types

Parameter Items

Technical Requirements
Power Types  Power types High-frequency Power Supply
Model and specifications TDFBZ-25A/25V
Cooling mode Air-cooled
Switch tube type IGBT
Input Characteristics Rated Input Voltage Three-phase,AC380V±10% ,50HZ
Rated Input Power 0.72KVA
Rated Input Current AC 1.1A
Input Power Factor COSΦ≥0.95
Output Characteristics Output Voltage DC  0~25V
Output Current DC  0~25A
Stabilized Current Precision ≤0.5%
Stabilized Voltage Precision ≤0.5%
Rated Output efficiency ≥91%
Environmental Conditions Installation site Indoor installations
Altitude ≤2000 meters
Ambient temperature -20℃~40℃
Relative humidity ≤95%
Control Mode Operating mode PLC, ADDA, Ethernet, RS485 or RS232
Other Weight About 25KG
External Dimension Height*Width*Depth H182mm×W372mm×D483mm
Protection Characteristics Over voltage, over current, short circuit, lack of phase, over heat, water temperature, water pressure, water leakage and other protection functions.
Main Structure


Optional models
Electrolytic copper foil TBSB-50KA/6.5V 6.5Vdc/50A
TBSB-50KA/7V 7Vdc/50KA
TBSB-45KA/6.5V 6.5Vdc/45KA
TBSB-30KA/7V 7Vdc/30KA
TBSB-45KA/8V 8Vdc/45KA
TBSB-35KA/7.5V 7.5Vdc/35KA
TBSB-50KA/8V 8Vdc/50KA
TBSB-35KA/8V 8Vdc/35KA
TBSB-40KA/8V 8Vdc/40KA
TBSB-50KA/6.3V 6.3Vdc/50KA
TBSB-2KA/25V 25Vdc/2KA
TBSB-1KA/30V 30Vdc/1KA
TBSB-200A/30V 30Vdc/200A
TBSB-100A/30V 30Vdc/100A
TBSB-40KA/6.5V 6.5Vdc/40KA
Electrolytic copper foil TDSB-800A/40V 40Vdc/800A
TBSB-700A/18V 18Vdc/700A
TBSB-48KA/7V 7Vdc/48KA
TBSB-5000A/7V 7Vdc/5000A
TBFBZ-600A/8V 8Vdc/600A
TBFBZ-30A/15V 15Vdc/30A
TBFBZ-50A/25V 25Vdc/50A
TBSB-50KA/10V 10Vdc/50KA
TBSB-1000A/25V 25Vdc/1000A
TBSB-1000A/30V 30Vdc/1000A
TBSB-8KA/30V 30Vdc/8KA
TBSB-36KA/6.5V 6.5Vdc/36KA
TBSB-48KA/6V 6Vdc/48KA
TBFBZ-400A/6V 6Vdc/400A
HIFB-2500A/6V 6Vdc/2500A
TBSB-48KA/7.5V 7.5Vdc/48KA
TBSB-200A/7.5V 7.5Vdc/200A
TBSB-54KA/7V 7Vdc/54KA
TBSB-60KA/7V 7Vdc/60KA
TBSB-60KA/8V 8Vdc/60KA
Related Products View More
Welcome to visit
Welcome to contact us for further discuss if you are interested in any of our products.
Any question?
Just leave us a message.

Liyuan rectifier, taking the lead in IGBT rectifier and SCR rectifier in China.

Get more details? We’ll respond as soon as possible (within 24 hours).

Home Product About Contact
Any question?
Just leave us a message.

Liyuan rectifier, taking the lead in IGBT rectifier and SCR rectifier in China.

Get more details? We’ll respond as soon as possible (within 24 hours).